Milling pin - PFERD - Carbide - Shaft Ø 6 mm - for steel - round arch form
| From € 37,08 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- the burr is suitable for machining, deburring, contouring, geometry modification and fettling of steel and cast steel
- can be operated with compressed air or electric drives and bending shafts
- Carbide burr in round cone shape, with special STEEL toothing, specially developed for machining steel and cast steel and with up to 50 % higher cutting performance
- the special tooth geometry significantly improves chip evacuation and the lower thermal load protects the workpiece and tool
- thanks to "PFERDERGONOMICS", vibration and noise pollution are reduced and working comfort is increased
- a drive power of 300 to 500 W is required in the upper speed range for the economical use of burrs with a shank diameter of 6 mm or more
- to avoid accidents and premature wear, only backlash-free clamping systems/drives should be used
- Material - carbide
- Toothing - STEEL
- Shape - round arch shape
- Shank diameter - 6 mm
- Total length - 55 to 70 mm
- Burr Ø x length - 6 x 18 to 16 x 30 mm
- Radius - 1.2 to 3.6 mm
- according to standard - DIN 8032
Versions: (5)
Narrow down your selection
designation
overall length
Milling pin Ø x length
radius
| Article No. | designation | overall length | Milling pin Ø x length | radius | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|
|
|
652121117387 | RBF 0618/6 STEEL | 55 mm | 6 x 18 mm | 1.5 mm |
|
||||
|
||||||||||
|
652121117687 | RBF 0820/6 STEEL | 60 mm | 8 x 20 mm | 1.2 mm |
|
||||
|
||||||||||
|
652121117787 | RBF 1020/6 STEEL | 60 mm | 10 x 20 mm | 2.5 mm |
|
||||
|
||||||||||
|
652121117887 | RBF 1225/6 STEEL | 65 mm | 12 x 25 mm | 2.5 mm |
|
||||
|
||||||||||
|
652121117987 | RBF 1630/6 STEEL | 70 mm | 16 x 30 mm | 3.6 mm |
|
||||
|
||||||||||
Ratings
No evaluation has been given
