Milling pin - PFERD - Carbide metal - Shaft Ø 3 mm - for INOX - spherical shape
| From € 16,46 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- the burr is suitable for machining, deburring, contouring, chamfering and rounding edges, preparing and levelling weld seams and changing the geometry of stainless steel (INOX), especially round shapes or drill holes
- can be operated with compressed air or electric drives and bending shafts
- Burr made of carbide in spherical shape, with special INOX toothing, which was specially developed for machining stainless steel (INOX) and has up to 100 % higher cutting performance and increases tool life
- due to the low heat development, annealing colours in the material are prevented, the optimal chip formation achieves a high-quality surface finish
- thanks to "PFERDERGONOMICS", vibration and noise pollution are reduced and working comfort is increased
- to avoid accidents and premature wear, only backlash-free clamping systems/drives should be used
- Material - carbide
- Toothing - INOX
- Shape - spherical shape
- Shank diameter - 3 mm
- Total length - 33 to 35 mm
- Burr Ø x length - 3 x 2 to 6 x 5 mm
- according to standard - DIN 8032
Versions: (4)
Narrow down your selection
designation
overall length
Milling pin Ø x length
| Article No. | designation | overall length | Milling pin Ø x length | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|
|
|
652121211082 | KUD 0302/3 INOX | 33 mm | 3 x 2 mm |
|
||||
|
|||||||||
|
652121212582 | KUD 0403/3 INOX | 34 mm | 4 x 3 mm |
|
||||
|
|||||||||
|
652121212682 | KUD 0504/3 INOX | 35 mm | 5 x 4 mm |
|
||||
|
|||||||||
|
652121213082 | KUD 0605/3 INOX | 35 mm | 6 x 5 mm |
|
||||
|
|||||||||
Ratings
No evaluation has been given
