Product Description
- The rotary vane vacuum pumps in the VT series are suitable for generating vacuum in industrial and commercial applications.
- They are used, amongst other things, for suction, holding and securing workpieces, as well as in vacuum clamping systems and handling systems.
- Other areas of application include packaging machines, automated manufacturing systems and production processes where a continuous vacuum is required. Thanks to their oil-free compression chamber, these pumps are particularly suitable for applications where contamination by lubricating oil from the compression chamber must be avoided.
- The pumps operate on the positive displacement principle and do not require oil in the compression chamber.
- An integrated vacuum control valve allows the vacuum to be adjusted to suit the specific operating requirements.
- The compact design is made possible by using the motor shaft directly as the rotor shaft, which facilitates integration into machinery and plant.
- The robust design is engineered for industrial use.
- Self-lubricating vanes allow operation without oil lubrication in the compression chamber, meaning that no oil changes are required.
- Models VT 4.10 – VT 4.16 – VT 4.25 – VT 4.4 – VT 4.40 – VT 4.8
- Operating principle – rotary vane, dry-running
- Operating mode – vacuum pump
- Motor drive – single-phase or three-phase motor
- Flow rate at 50 Hz – 4.1 to 40 m³/h
- Air flow rate at 60 Hz – 4.7 to 48 m³/h. The figures depend on the model and frequency.
- Rated voltage – 230/400 V (depending on model and motor) Single-phase motor – 230 V Three-phase motor – 230/400 V (delta/star connection, for relevant models)
- Mains frequency – 50/60 Hz, depending on the motor type
- Protection class (EN 60529) – IP54
- Temperature monitoring – none
- Motor approval – CE
- Accessories – Blow-off valve
- Suction-side connection – G 3/8" – G 1/4" – G 1/2" or G 3/4"
- Suction-side valve – control valve
- Valve setting (suction) mbar – 150
- The VT 4.2 model has a pressure of 400 mbar
- Valve on suction side; pressure type – absolute pressure
- Finish – Standard grey
The vanes are subject to wear and tear during operation and must be inspected in accordance with the manufacturer’s maintenance guidelines and replaced if necessary.
