Product Description
- The SMC JXC stepper motor controller is used in automation applications to control SMC electric drives.
- It is suitable for applications where a controller needs to be flexibly configured for a specific actuator.
- The controller is used for electric cylinders, slides, grippers and other compatible electric actuators.
- It is used in machinery and systems where motion sequences are controlled via a stepper motor controller.
- The SMC JXC stepper motor controller, supplied as a blank controller, can be configured by the user with the specifications of the intended electric drive.
- Commissioning is carried out using the specialised JXC-BCW parameterisation software.
- The controller is only programmed and put into operation once it has been assigned to a compatible actuator.
- It is designed for use with various controller and actuator series on the JXC platform.
- Fieldbus protocol – EtherCAT®, EtherNet/IP, PROFINET or IO-Link
- Data transfer rate – 100 Mbps (EtherCAT and PROFINET), 10/100 Mbps (automatic connection establishment) (EtherNET/IP), 230.4 kbps (COM3) (I/O-Link)
- Compatible actuators – LEY/LEYG, LEFS/LEFB, LES/LESH, LER, LEL, LEP, LEH, LEM
- Dual communication connection – IN/OUT (not for JXCL1. For JXCD1, loop-through wiring can be achieved using a branch connector)
- Compatible encoder – incremental encoder / battery-free absolute encoder
- Installation – screw-mounted or DIN rail mounting
- Compatible motor – stepper motor (24V DC)
- Power supply – 24 V DC ±10 %
- Current consumption (controller) max. – 100 to 200 mA
- Terminating resistor – not included
- Data storage – EEPROM
- Status display – PWR, RUN, ALM, ERR (EtherCAT) / PWR, ALM, MS, NS (EtherNET/IP) / PWR, ALM, SF, BF (PROFINET) / PWR, ALM, COM (I/O-Link)
- Cable length – drive cable max. 20 m
- Cooling system – air cooling by natural convection
- Operating temperature range – 0 to 55 °C (no freezing)
- Humidity range – max. 90% relative humidity (no condensation)
- Insulation resistance – Between all external terminals and the housing: 50 MΩ (500 V DC)
- Width – 35 mm
- Height – 187.3 mm
- Depth – 67 mm
- Weight – 190 to 240 g
