Screw-in heating element - VA heating coil - 1 1/2" thread MS - with regulator and limiter
Screw-in heating element - VA heating coil - 1 1/2" thread MS - with regulator and limiter
Product Description
Screw-in heaters are suitable for directly heating liquid and gaseous media.
Screw-in heating elements are used in warm and hot water preparation, oil heating, instantaneous water heaters, heat exchangers, washing and cleaning systems, and air heating.
Description
Structure
Three U-shaped bent tubular heating elements (Ø 8.5 mm) are hard soldered into a brass screw connection.
Stainless steel 1.4571 is used as the radiator jacket material.
The cable connection is made using M4 threaded pieces and is supplied with a plastic cap.
Other media, immersion depths and outputs available on request
Technical Data
Material thread – brass
Size Thread - R 1 1/2" - with hexagon (SW65)
Cable connection – M4 threaded piece
Cable connection with plastic cap
Immersion depths – from 150 to 1600 mm
Heating output - from 1.5 to 20.1 kW
with controller 30-80°C
with limiter 110 °
Medium – water
On request, also available with other controller/limiter combinations (see product data sheet)
