Solenoid valve - 2/2-way - brass - compressed air/water/oil - female thread G 1/8" to G 2" - normally open - PN 0 to 16
Solenoid valve - 2/2-way - brass - compressed air/water/oil - female thread G 1/8" to G 2" - normally open - PN 0 to 16
(Exemplary presentation)
Product Description
The 2/2-way solenoid valve is ideally suited for use with compressed air, neutral media, water and media that do not attack the housing material and seal.
Description
The solenoid valve is made of brass and stainless steel, the seal is made of nitrile rubber and fluororubber for the G 1/8" and G 1/4" types.
The valve is designed with a standing solenoid as the installation position.
The valve is always supplied with a coil and a plug.
The servo-controlled valve requires a pressure difference between the valve inlet and outlet to open or close. The pressure difference is specified as the minimum pressure. If a pressure equalisation occurs in the valve, for example because no or only a small amount of medium has been used at the valve outlet, the valve will no longer function.
Technical Data
Body material - brass
Material inner parts - brass and stainless steel
Seal material (G 1/8" and G 1/4") - FKM
Seal material (G 3/8" to G 1") - NBR
Nominal diameter - 2.5 to 50
Connection thread (female thread) - G 1/8" to G 2"
