Solenoid valve - 2/2-way - stainless steel - compressed air water oil - 0 to 20 bar - closed when currentless
Solenoid valve - 2/2-way - stainless steel - compressed air water oil - 0 to 20 bar - closed when currentless
(Exemplary presentation)
Product Description
The 2/2-way solenoid valve is ideally suited for use with compressed air, neutral media, water and media that do not attack the housing material and seal.
Description
The solenoid valve is made of stainless steel and the seal is made of fluororubber.
From a thread size of G 3/8", the valve is equipped with a horizontal solenoid in addition to a vertical solenoid. For smaller connection threads, only an upright solenoid is installed.
The valve is always supplied with a coil and a plug.
The servo-controlled valve requires a pressure difference between the valve inlet and outlet to open or close. The pressure difference is specified as the minimum pressure. If a pressure equalisation occurs in the valve, for example because no or only a small amount of medium has been used at the valve outlet, the valve will no longer function.
Technical Data
Body material (G 1/8" to G 1/4") - Stainless steel 1.4104
Body material (G 3/8" to G 2") - Stainless steel 1.4581
Material of internal parts (G 3/8" to G 2") - Stainless steel 1.4104
Seal material - FKM
Nominal diameter - 3 to 50
Connection thread (female thread) - G 1/8" to G 2"
