Item No.:
1091EV225000
Product Description
- The EV225 automatic solvent distiller from Ciemme offers an innovative solution for the efficient recovery and reuse of very large quantities of solvents in industrial processes.
- The EVOLUTION series is particularly suitable for businesses that use large quantities of solvents, such as those in the printing, painting and coating industries, as well as in the pharmaceutical industry.
- Thanks to its ATEX 2G certification, the distiller is approved for use in potentially explosive atmospheres in ATEX Zone 1.
- The advanced, automatic distillers in the EVOLUTION series are characterised by their high performance and user-friendliness. They enable companies to reduce the costs of disposing of and purchasing new solvents by up to 90 per cent by recycling and reusing the solvents.
- With the EVOLUTION series from Ciemme, you benefit from a versatile system that integrates seamlessly into your production processes.
- The distiller offers optimised process control to provide clean, ready-to-use solvents, thereby increasing operational efficiency.
- Furthermore, using these distillers can help to reduce the volume of hazardous waste.
- The reduced storage space requirements and increased operational autonomy, thanks to on-site solvent recycling, also ensure greater flexibility and independence.
- The distillation parameters can be set via a PLC panel. The distillation cycle then runs entirely automatically. The feed pump starts automatically to fill the evaporation tank; as soon as the tank is full, the pump stops automatically so that heating can begin. The distilled solvent is automatically discharged into the integrated drum. At the end of the cycle, a cooling cycle is carried out to automatically drain the residue at a preset temperature.
- Daily output – 1,000 to 1,300 l/24h
- Average peak output – 55 to 65 l/h
- Loading capacity – 210 l
- Total tank capacity 330 litres
- Manhole cover gasket – PTFE
- Heating capacity – 15 kW
- Diathermic oil capacity – 100 l
- Pneumatic feed pump – 3/4" PTFE diaphragm
- Pneumatic pump for distilled solvents – 3/4" PTFE diaphragm
- Diameter of the residual drain valve – 3"
- Residue drain tank – 200-litre drum – optional IBC
- Hydraulic power unit motor – 1.5 kW
- Diathermic oil pump motor – 0.37 kW
- Fan for oil cooling – 0.18 kW
- Steam-cooled fan – 0.55 kW
- Cooling fan diameter: 550 mm
- Mains supply voltage – 400 V / 3-phase + N / 50 Hz
- Connection cable – 5G3 N+T
- Compressed air connection – 5/6 bar – 10 mm hose
- Compressed air consumption – 300 Nlt/min
- Noise level – 75 dB
- Approximate overall dimensions L x W x H (varies depending on configuration) – 3000 x 1600 x 3700 mm
- PLC control system – Siemens S7 1200 Series
- Control panel – Weintek
- Operating temperature: -50 to 190 °C
- Certification – II 2G Ex h IIB T3 – II 1/2 G Ex h IIB T3 Ga/Gb
