Item No.:
1091EV400000
Product Description
- The EV400 automatic solvent distiller from Ciemme is designed for the recovery and treatment of large quantities of solvents in industrial processes.
- The EVOLUTION series is designed for businesses that process large quantities of solvents, for example in the printing, painting, coating and pharmaceutical industries.
- According to the manufacturer’s specifications, the solvent distiller bears an ATEX marking for equipment category 2G. Suitability for use in Zone 1 potentially explosive atmospheres is determined by the full ATEX marking and the manufacturer’s documentation.
- The advanced, automatic distillers in the EVOLUTION series are characterised by their high performance and user-friendliness. They enable businesses to reduce the costs of disposing of and purchasing new solvents by up to 90 per cent by recycling and reusing the solvents.
- With the EVOLUTION series from Ciemme, you benefit from a versatile system that integrates seamlessly into your production processes.
- The distiller offers optimised process control to provide clean, ready-to-use solvents, thereby increasing operational efficiency.
- Furthermore, using these distillation units can help to reduce the volume of hazardous waste.
- The reduced storage space requirements and increased operational autonomy, thanks to on-site solvent recycling, also ensure greater flexibility and independence.
- The distillation parameters can be set via a PLC panel. The distillation cycle then runs entirely automatically. The feed pump starts automatically to fill the evaporation tank; as soon as the tank is full, the pump stops automatically so that heating can begin. The distilled solvent is automatically discharged into the integrated drum. At the end of the cycle, a cooling cycle is carried out to automatically drain the residue at a preset temperature.
- Daily output – 2,000 to 2,500 l/24h
- Average peak output – 105 to 125 l/h
- Loading capacity – 400 l
- Total tank capacity 570 litres
- Manhole cover gasket – PTFE
- Heating capacity – 30 kW
- Diathermic oil capacity – 185 l
- Pneumatic feed pump – 1" PTFE diaphragm
- Pneumatic pump for distilled solvents – 3/4" PTFE diaphragm
- Diameter of the residual drain valve – 3"
- Residue drain tank – 200-litre drum – optional IBC
- Hydraulic power unit motor – 1.5 kW
- Diathermic oil pump motor – 0.55 kW
- Fan for oil cooling – 0.25 kW
- Steam-cooled fan – 0.55 kW
- Cooling fan diameter: 600 mm
- Mains supply voltage – 400 V / 3-phase + N / 50 Hz
- Connection cable – 5G3 N+T
- Compressed air connection – 5/6 bar – 10 mm hose
- Compressed air consumption – 300 Nlt/min
- Noise level – 75 dB
- Approximate overall dimensions L x W x H (varies depending on configuration) – 3800 x 1860 x 3900 mm
- PLC control system – Siemens S7 1200 Series
- Control panel – Weintek
- Operating temperature: -50 to 190 °C
- Certification – II 2G Ex h IIB T3 – II 1/2 G Ex h IIB T3 Ga/Gb
