Item No.:
1091EV800000
Product Description
- The EV800 automatic solvent distiller from Ciemme is designed for the recovery and treatment of large quantities of solvents in industrial processes.
- The EVOLUTION series is designed for businesses that process large quantities of solvents, for example in the printing, painting, coating and pharmaceutical industries.
- According to the manufacturer’s specifications, the solvent distiller bears an ATEX marking for equipment category 2G. Its suitability for use in Zone 1 potentially explosive atmospheres is determined by the full ATEX marking and the manufacturer’s documentation.
- The automatic solvent distillers in Ciemme’s EVOLUTION series are designed for the treatment and recovery of solvents in industrial production processes.
- The distillers separate solvents from the residues they contain by means of distillation. Depending on their composition and the specific process requirements, the recovered solvents can be reused.
- The EVOLUTION series is designed for integration into industrial production processes and features automatic process control.
- The distillation parameters can be set via a PLC control panel. The distillation cycle then runs automatically.
- At the start of the cycle, the feed pump delivers the solvent to be processed into the evaporation tank. As soon as the specified level is reached, the pump stops automatically and the heating process begins.
- The distilled solvent is then automatically channelled into a designated collection tank.
- A cooling phase takes place at the end of the distillation cycle. As soon as the preset temperature is reached, the residues remaining in the evaporation tank are automatically drained off.
- Daily output – 5,000 litres
- Average peak output – 200 to 250 l/h
- Loading capacity – 800 l
- Lid seal – PTFE
- Heating capacity – 55 kW
- Pneumatic feed pump – 1" PTFE diaphragm
- Pneumatic pump for distilled solvent – 1" PTFE diaphragm
- Diameter of the residual drain valve – 3"
- Residue drain tank – 200-litre drum – optional IBC
- Mains supply voltage – 400 V / 3-phase + N / 50 Hz
- Connection cable – 5G3 N+T
- Compressed air connection – 5/6 bar – 10 mm hose
- Compressed air consumption – 300 Nlt/min
- Noise level – 75 dB
- PLC control system – Siemens S7 1200 Series
- Control panel – Weintek
- Operating temperature: -50 to 190 °C
- Certification – II 2G Ex h IIB T3 – II 1/2 G Ex h IIB T3 Ga/Gb
