Item No.:
1091K4000000
Product Description
- The K400 semi-automatic solvent distiller from Ciemme is designed for the recovery and treatment of large quantities of solvents in industrial processes.
- The TECHNO series is designed for processing larger quantities of solvents and can be used, for example, in the printing, painting, coating and pharmaceutical industries.
- According to the manufacturer’s specifications, the solvent distiller has an ATEX marking for equipment category 2G. Suitability for use in Zone 1 potentially explosive atmospheres must be verified on the basis of the full ATEX marking and the manufacturer’s documentation.
- The semi-automatic solvent distillers in Ciemme’s TECHNO series are designed for the treatment and recovery of solvents in industrial production processes.
- The distillers separate solvents from the residues they contain by means of distillation. Depending on their composition and the specific process requirements, the recovered solvents can be reused.
- The TECHNO series is designed for integration into industrial production processes and features a programmable logic controller (PLC).
- The distillation parameters can be set via a control panel to suit the specific process requirements. The distillation process then runs automatically.
- The distilled solvent is automatically channelled into a designated collection tank. The distillation residues remaining in the evaporation tank can be drained off at the end of the cycle via a drain valve. Depending on the configuration, draining is carried out either manually or automatically.
- Capacity – 400 l
- Daily output – 2,000 litres
- Average – peak productivity – 85 to 100 l/h
- Lid seal – PTFE
- Heating capacity – 30 kW
- Pneumatic feed pump – 1" PTFE diaphragm
- Pneumatic pump for distilled solvent – 3/4" PTFE diaphragm
- Diameter of the residual drain valve – 2 1/2"
- Residue collection container – 200 l (52 gal) drum – IBC (optional)
- Supply voltage – 400 volts / 3-phase + N / 50 Hz
- PLC control system – Siemens S7 1200 Series
- Certification – ATEX 2G
