Special Tools

From € 19.436,67

Price incl. VAT

Hydraulic separator GOLIATH-218 - mobile - clamping depth 300 to 700 mm - tensile force 20 to 50 t

From € 17.730,00

Price incl. VAT

GOLIATH mobile hydraulic puller - Clamping depth 300 to 700 mm - Clamping width - 0 to 1200 mm - Pulling force 20 to 50 t - Pulling height 400 to 1000 mm

From € 17.560,00

Price incl. VAT

Mobile motorized conductor "URANOS" - 3-point suspension - Chain length 1245 to 1900 mm - Load capacity 500 to 2000 kg - Price per piece

From € 9.016,67

Price incl. VAT

Wheel hub puller - mobile - with disk traverse - max. pulling force 30 t - spindle M16 to M20 thread

€ 6.136,67

Price incl. VAT

Induction heater - commercial vehicle version - liquid-cooled - mains frequency 50 to 60 Hz - mains voltage 230 V

€ 2.856,19

Price incl. VAT

Removal/insertion tool set for suspension joints - span up to 265 mm - for RL 75 E and RL 75 EC - price per piece

€ 2.441,60

Price incl. VAT

Gedore press frame - NFZ - max. load 12 tonnes

€ 1.985,21

Price incl. VAT

Gedore compression/support sleeves set - diameter 30 to 90 mm - short version - price per set

€ 1.599,31

Price incl. VAT

Gedore mechanical wheel hub puller set - suitable for commercial vehicle wheel hubs with removable hub cap - bolt circle Ø 8x275 / 10x335 mm - price per set

€ 1.516,67

Price incl. VAT

Gedore press frame - Supplement for wheel hub puller 28 t - Price per set

€ 1.485,07

Price incl. VAT

Gedore thrust piece set - suitable for commercial vehicles - price per set

€ 1.444,44

Price incl. VAT

Gedore wheel hub puller - mechanical - for commercial vehicles - Price per set

€ 1.354,92

Price incl. VAT

Gedore hydraulic drive set - with press frame and hydraulic cylinder - suitable for pulling devices of the KL-0039 series - 13 pieces

€ 1.243,26

Price incl. VAT

Steering Gear Tool Kit

€ 1.199,04

Price incl. VAT

Gedore wheel hub puller set - without drive - for axle systems BPW, SAF, ZF - price per set

€ 1.137,51

Price incl. VAT

Gedore clamping cylinder - for MacPherson strut and wishbone axles - clamping width 40-375 mm - price per piece

€ 1.108,89

Price incl. VAT

Gedore pulling device - for silentblocs - mechanical - Price per set

€ 1.075,44

Price incl. VAT

Gedore wheel hub extractor - max. load 12 t - for diameters up to 250 mm - price per set

€ 1.016,27

Price incl. VAT

Gedore compression/support sleeves set - with guide bolt - Ø 30 to 90 mm - short version - price per set

€ 1.005,96

Price incl. VAT

Gedore spring clamps - with protective inserts - clamping width 50 to 345 mm - price per set

€ 996,67

Price incl. VAT

Gedore clamping cylinder - for spring holders - Price per piece

€ 907,93

Price incl. VAT

Gedore wheel press-off press / body press - Stroke 15 mm - Max. load 17 t - Price per set

€ 907,93

Price incl. VAT

Gedore VDE extension set - suitable for hybrid and electric vehicles - price per set

€ 881,11

Price incl. VAT

Gedore hydraulic cylinder - short version - max. permissible force 17 t - max. oil pressure 700 bar - for hydraulic coupling 3/8"-18 NPT - price per piece

€ 780,00

Price incl. VAT

Gedore Simmerring indenter - Ø 175 mm - for Mercedes ACTROS and ATEGO - Price per set

€ 766,67

Price incl. VAT

Gedore support device - for supporting car engines - Price per piece

€ 750,00

Price incl. VAT

Gedore assembly tool set - for sealing flange with encoder wheel - suitable for VW, Audi, Seat, Skoda, Mitsubishi - price per set

€ 736,67

Price incl. VAT

Gedore injector extractor set - universal for various injectors - price per set

€ 718,10

Price incl. VAT

Gedore silentbloc tool - sleeve set - for outer Ø 139 mm - suitable for Mercedes - price per set

€ 670,12

Price incl. VAT

Valve cutter set - 14 pcs.

€ 599,04

Price incl. VAT

Gedore silentbloc tool - pressing device - suitable for Ford, Volvo - price per set

€ 593,33

Price incl. VAT

Induction heating - Max. 1.5 kW - Weight 4.5 kg

€ 532,38

Price incl. VAT

Gedore extension set - size 1+2+3 - for VW-Audi - price per set

€ 494,21

Price incl. VAT

Gedore injector extractor set - for direct injection gasoline engines - price per set

€ 478,33

Price incl. VAT

Gedore press frame - max. load 17 tonnes - universal fit

€ 472,03

Price incl. VAT

Gedore pin spanner - inside Ø 117 mm - with 6 pins - suitable for MAN - price per piece

€ 467,38

Price incl. VAT

Gedore sleeve set - for suspension joints on Mercedes Sprinter / VW Crafter - Price per set

€ 448,81

Price incl. VAT

Focusing coil - angled 20 ° - for Art. 2170 - length 40 mm - width 20 mm

€ 429,62

Price incl. VAT

Crankshaft Radial Seal Installation Tool - for Volvo (FM12) D12/D12A/D12D

€ 422,86

Price incl. VAT

Gedore pulling device for double cable bearing - without drive - suitable for VW-Audi - 9 parts

€ 413,22

Price incl. VAT

Common rail high pressure tester - suitable for CR systems Bosch, Siemens, Delphi and Denso

€ 399,96

Price incl. VAT

Basic chain breaker 59-1 - steel - for chain pin Ø 3.28 to 5.72 mm - chain passage width 48 mm - price per piece

€ 397,06

Price incl. VAT

Focusing coil - straight - for item 2170 - 42 x 20 x 38 mm (L x W x D)

€ 383,43

Price incl. VAT

Compact induction heater - 1.2 kW - mains frequency 50 to 60 Hz - mains voltage 230 V

€ 380,00

Price incl. VAT

Gedore ball joint extractor - size 3 - various mounting sizes Mounting sizes - price per piece

From € 372,99

Price incl. VAT

Gedore radial shaft seal indenter - Ø 105 mm - suitable for MAN, Neoplan - 3-piece

€ 365,56

Price incl. VAT

Eraser - with connection for suction - 6.3 bar - 4000 U / min

€ 360,96

Price incl. VAT

Gedore track gauge - Measuring range 950 to 1500 mm - Price per piece

€ 338,89

Price incl. VAT

Cylinder liner extractor - with counter support - for diameters 60 to 160 mm

€ 319,04

Price incl. VAT

Gedore extension set - size 3 - for VW-Audi - Price per set

€ 308,90

Price incl. VAT

Gedore tanker wrench set - incl. basic tool, adapter, combination wrench - price per set

€ 308,78

Price incl. VAT

Wheel bearing tool set - for VAG - for size 62, 66, 72 and 85 mm

€ 303,81

Price incl. VAT

Gedore hand pump - for positive and negative pressure systems - Price per set

€ 299,22

Price incl. VAT

Gedore silentbloc tool - sleeve set - suitable for Ford, Mazda, Volvo - price per set

€ 289,56

Price incl. VAT

Steering head bearing installation kit 71-M - for ball position inner Ø 25 to 35 mm - impact sleeve Ø 32 x 360 mm - price per set

€ 287,42

Price incl. VAT

Differential flange and insert nut tool set - for BMW E70, E82, E90, E91, E92, E93

€ 284,77

Price incl. VAT

Trailing arm bushing tool kit - for Ford and Volvo

€ 280,96

Price incl. VAT

Gedore injector extractor - suitable for Ford EcoBlue 2.0 - price per set

€ 279,10

Price incl. VAT

Torque multiplier kit - for Ford EcoBoost, 1.0/1.1 Duratec, 2.0 Duratorp-TDCi, 2.0 EcoBlue Diesel

€ 271,43

Price incl. VAT

Gedore assembly tool - for valve wedges - Ø6 mm

€ 266,30

Price incl. VAT

Gedore hydraulic drive set - for wheel bearing sets KL-0039 - without cylinder and pump - price per set

€ 260,62

Price incl. VAT

Timing chain riveter - for Mercedes Benz timing chains with 3 or 4 mm chain pins

€ 259,52

Price incl. VAT

Gedore friction coefficient meter - Measuring range 0.3-6 Nm - Price per piece

€ 244,44

Price incl. VAT

Gedore mounting device for hydraulic cylinders - mounting diameter 30 mm - without clamping ring - price per piece

€ 240,81

Price incl. VAT

Valve grinding machine - for drilling machine - automatic change of lapping direction

€ 236,19

Price incl. VAT

Gedore extension set - size 7 - for VW T5 - price per set

€ 231,63

Price incl. VAT

Gedore silentbloc tool set - thrust piece / sleeve set - Ø 40 mm - suitable for Renault, Volvo - price per set

€ 231,63

Price incl. VAT

Gedore clamping pliers - for steering and axle boots - Price per set

€ 226,26

Price incl. VAT

Gedore injector extractor extension set - for Bosch injectors - M14 - angle 45° - price per set

€ 222,03

Price incl. VAT

Gedore ejector tool set - for receptacles - universal fit - price per set

€ 222,00

Price incl. VAT

Crankshaft radial seal ring tool set - for various BMW models

€ 218,10

Price incl. VAT

Gedore drive set M16 - for hydraulic cylinders with 89 mm - 3-piece set

€ 212,33

Price incl. VAT

Gedore disc holder set - Ø90/60 mm - for spring discs - suitable for Audi, Cupra, Nissan, Renault, Seat, Skoda, VW - price per set

€ 212,33

Price incl. VAT

Gedore hold-down device - with insert - for internal spring clamps - Price per set

€ 209,03

Price incl. VAT

Driving tool kit - for motorcycle fork seals - 9 pcs.

€ 204,77

Price incl. VAT

Ball Head Disassembly tool kit - forks in 20 mm to 30 mm

€ 204,29

Price incl. VAT

Crankshaft seal assembly tool - for DAF (CF 85) - 4610 g

€ 204,29

Price incl. VAT

Hydraulic pusher for drive shafts - 4 and 5 hole hub - 12 t

€ 203,81

Price incl. VAT

Gedore red cylinder head drilling jig set - 30-piece set - Price per set

€ 202,52

Price incl. VAT

Gedore fixing tool - for unit carriers for Audi, Seat, Skoda, VW - 8 pieces

€ 201,90

Price incl. VAT

Front Axle Wishbone Bushing Tool Kit - for VW T5

€ 189,52

Price incl. VAT

Intermediate lever spring tool - for BMW B38 / B48

€ 186,19

Price incl. VAT

Crankshaft seal assembly tool - for Scania (114) 340/360/380

€ 185,71

Price incl. VAT

Stud Pullers - Clamping Range 5-19 mm - Kukko

€ 184,07

Price incl. VAT

Gedore supplementary set - size 6 - for BMW - price per set

€ 183,34

Price incl. VAT

Fuel injector tool - for BMW B36/B38/B48

€ 183,33

Price incl. VAT

Beating kit - stainless and carbon steel - 30 pcs.

€ 180,00

Price incl. VAT

Gedore drive shaft dismantling lever - Length 610 mm - Price per piece

€ 179,32

Price incl. VAT

Stud Extractor - large clamping range - Ø 5 to 19 mm - KUKKO

€ 177,79

Price incl. VAT

Gedore mounting lever - for VW, Audi, Seat, Skoda petrol engines - Price per piece

€ 176,22

Price incl. VAT

Gedore impact extractor - with adapter 2 1/4 ''-14 UNS to M18 - price per piece

€ 173,74

Price incl. VAT

Drive shaft nut socket wrench - for MAN TGA 460 axles - external hexagon - SW 118 to 133 mm

€ 173,33

Price incl. VAT

Tension and compression sleeves kit - 4 spindles - M10-M16

€ 171,38

Price incl. VAT

Trailing arm bushings tool set - for Ford & Volvo - with case - price per piece

€ 170,48

Price incl. VAT

Locknut wrench set - 9 pieces - pin inside - KM4 to KM12

€ 170,48

Price incl. VAT