Adsorption dryer ADM-DRY - 0.5 to 1.5 m³/min - max 16 bar - with fixed cycle times
| From € 1.802,76 |
| Price incl. VAT |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The ADM modular adsorption dryers are highly efficient units for drying compressed air.
- Adsorption dryers consist of two aluminum profile columns, which contain the optimum amount of desiccant.
- During use, compressed air slowly flows alternately into both columns and is brought into contact with the desiccant, removing moisture from the air.
- Switching between the two columns works with a preset optimal cycle time of 10 minutes.
- The Comprag ADM adsorption dryers, which use the ten-minute cycle time, use on average only about 1% of the total purified air.
- The operation is fully automatic.
- At constant pressure, the pressure dew point is maintained at -40 °C, for efficient drying.
- It is a high quality desiccant with high specific surface area.
- The control of the purge air volume is manual.
- Volume flow (measured according to ISO 7183) - 0.5 to 1.5 m3/min
- Operating pressure max. - 16 bar
- Screw connection - G 1/2"
- Rated voltage (phase/V/Hz) - 1/230/50
Versions: (4)
Narrow down your selection
Volume flow
| Article No. | Volume flow | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|
|
|
202214500101 | 0,50 m3/min |
|
||||
|
|||||||
|
202214500102 | 0.70 m3/min |
|
||||
|
|||||||
|
202214500103 | 1.00 m3/min |
|
||||
|
|||||||
|
202214500104 | 1,50 m3/min |
|
||||
|
|||||||
Ratings
No evaluation has been given
