Item No.:
361545219000
Product Description
- The Wiha current clamp allows current measurements to be taken without interrupting the circuit.
- When working on electrical installations that cannot be switched off, measuring current can be a major challenge.
- The use of the current clamp is made easier by the contactless, one-handed testing.
- The test probes enable further tests, such as voltage measurements in the AC and DC ranges, as well as resistance, frequency and capacitance measurements. Continuity tests and diode tests are also possible.
- The measurement results can be read immediately and retained beyond the measurement process via a large backlit LCD display with a data hold function.
- An additional audible signal indicates the flow of current during the continuity test.
- An integrated torch function ensures optimum lighting conditions.
- The LPF and True RMS functions enhance the reliability of the test by providing interference-free RMS values.
- Voltage V DC min. – max. 0 to 1500
- Voltage V AC min. – max. 0 to 1000
- Current A DC - 400
- Current A AC - 400
- Resistance (MΩ) - 40 MΩ
- Integrated torch - Yes
- Frequency - 5 MHz
- True RMS - Yes
- Backlight - Yes
- Data HOLD - Yes
- Min measurement - Yes
- Max measurement - Yes
- Measurement category - CAT IV 1,000 V
- Non-contact voltage testing - Yes
- Battery-powered - Yes (2 x 1.5 V batteries, IEC LR03)
- AVG measurement - Yes
- Continuity test -
- Overall length - 220 mm
