Product Description
- The digital force gauge is particularly suitable for measuring and recording tensile and compressive forces of very small magnitudes or loads in machinery and plant
- Force measurement system comprising an external sensor and a high-resolution display unit
- The device is suitable for all Sauter test benches (please specify the test bench when ordering)
- with peak hold function for recording the peak value and track function for continuous measurement display
- The push-and-pull function allows compressive and tensile forces to be measured
- An upper and lower limit value can be set; if these limits are exceeded or not reached, a visual and audible signal is emitted
- The mini-statistics function allows the calculation of averages from up to 10 stored values, as well as the display of minimum and maximum values
- One load cell can be connected per display unit
- The device is powered by an internal rechargeable battery; the charger is included
- Upon request, you can obtain the calibration certificate for tensile and compressive force separately or in combination
- Dimensions of the display unit (L x W x H) – 240 × 70 × 40 mm
- Dimensions of external sensor (L x W x H) – 75 x 70 x 20 mm
- Cable length of display unit – approx. 2 m
- Max. measuring range – 20 to 500 N
- Readability [d] – 0.01 to 0.1 N
- Tolerance of max. 1%
- Selectable units – N, kg, lb
- Overload protection – 150% of maximum
Calibration certificates available on request
