Double-layer clamping profile hose - CP PTFE/GLASS-INOX 471 EC - Inner Ø 50-51 to 1,000 mm - Length up to 6 m - Price per meter or per roll
From € 195,39 / m |
Price incl. VAT |
plus cut length surcharge
Delivery within 7-10 days
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
709005010031
Type
Inner Ø (inch/mm) | 2 / 50 - 51 mm |
outer Ø | 62 mm |
overpressure | 0.410 bar |
negative pressure | 0.300 bar |
bend radius | 18 mm |
length | per meter |
Product Description
- The flexible clamping profile hose CP PTFE/GLASS-INOX 471 EC is ideally suited for hot and cold gases, dusts, powders and fibers.
- The suction and pressure hose is also used to transport chemical and paint vapors and to extract paint mist.
- The clamping profile hose is ideal for use as a vapor recovery hose on the loading arm and in the extraction system as an extraction arm.
- The suction and discharge hose CP PTFE/GLASS-INOX 471 impresses with its abrasion protection thanks to the outer clamping profile and the tension-resistant clamping in the clamping profile.
- The hose is highly flexible, compressible and, in addition to its very good heat resistance, has good resistance to alkalis, acids and extremely good chemical resistance.
- It is anti-adhesive and therefore very easy to clean.
- In accordance with TRGS 727 and ATEX 2014/34/EU (1999/92/EC), the hose is suitable for aspiration of combustible dusts (zone 22 inside), for use in zones 1 and 2 (gases), for use in zone 0 (gases).
- Wall material - PTFE/TEFLON®
- Clamping profile support spiral - All stainless steel (INOX)
- Inner Ø - 50-51 to 1000 mm
- Outer Ø - 62 to 1012 mm
- Bending radius - 18 to 208 mm
- Compressible - 4:1
- Overpressure - 0.015 to 0.410
- Negative pressure - 0.001 to 0.300 bar
- Temperature range - -150°C to 250°C, briefly up to 270°C
- REACH - compliant according to 1907/2006/EC
- RoHS - compliant according to 2015/863/ EU RoHS 3
- Length - up to 6 m
- Price per meter or per roll
Versions: (35)
Narrow down your selection
Inner Ø (inch/mm)
outer Ø
overpressure
negative pressure
bend radius
length
Ratings
No evaluation has been given