Product Description
- The Festo rotary actuator from the DAPS series is suitable for use in industrial automation systems, chemical processes, energy and water technology, and in potentially explosive areas.
- Thanks to its robust design, ATEX approval and precise swivel characteristics, it is particularly suitable for demanding applications that require precise torque curves, high safety requirements and temperature resistance.
- The Festo DAPS-0960 rotary actuator is a powerful, double-acting pneumatic actuator with yoke kinematics for precise rotary movements.
- The compact design and high efficiency enable reliable, uniform torque transmission across the entire swivel range.
- Suitable for demanding industrial environments, it complies with ISO 5211 and VDI/VDE 3845 (NAMUR) standards.
- The actuator is ATEX-compliant and can be used in safety-related control circuits up to SIL 2.
- Actuator size - 0960
- Functionality – double-acting
- Design structure – yoke kinematics
- Swivel angle - 92°
- Closing direction – right-hand closing
- Installation position – any
- Operating pressure [bar] - 3 to 8.4
- Nominal operating pressure [bar] - 5.6
- Torque at 0° (nominal operating pressure) – 960.0 Nm
- Torque at 50° (nominal operating pressure) – 480.0 Nm
- Torque at 90° (nominal operating pressure) – 720.0 Nm
- Air consumption at 6 bar/cycle 0°–90°–0° – 42.35 l
- Shaft connection - T36
- Shaft connection depth – 38.5 mm
- Pneumatic connection - G1/4
- Flange drilling pattern - F10, F12, F14
- Standard connection to valve – ISO 5211
- Valve connection complies with standard VDI/VDE 3845 (NAMUR)
- Position detection – without
- Damping – no damping
- Safety Integrity Level (SIL) – up to SIL 2 (low demand), suitable according to SRP/CS
- CE mark – in accordance with EU explosion protection directive (ATEX)
- ATEX category Gas - II 2G
- ATEX category Dust - II 2D
- Ex ignition protection type gas - Ex h IIC T6...T3 Gb X
- Ex ignition protection type Dust - Ex h IIIC T85°C...T200°C Db X
- Ex ambient temperature range - -50 °C to +60 °C
- Ambient temperature - -50 °C to +60 °C
- Operating medium – compressed air in accordance with ISO 8573-1:2010 [7:4:4]
- Note on operating medium - Gel operation possible (then permanently required)
- Corrosion resistance class (KBK) - 2, moderate corrosion exposure
- Cover material – wrought aluminium alloy
- Housing material – wrought aluminium alloy
- Seal material – FVMQ, PTFE-reinforced
- Shaft material – high-alloy steel
- Material of screws – high-alloy steel
- Material number shaft - 1.4305
- Material information – Contains LABS-containing substances, RoHS compliant
- Weight - 23,800 g
- Packaging unit - 1 piece
- Price per item
