Product Description
- The rotary actuator is suitable for pneumatic controls in potentially explosive areas with high requirements for safety, corrosion resistance and service life.
- The DAPS-0015-090-RS pneumatic rotary actuator is a compact, single-acting actuator with yoke kinematics and a swivel angle of 90°.
- It is specially designed for demanding industrial applications with high corrosion resistance (KBK 3) and is suitable for use in potentially explosive atmospheres according to ATEX (Zone 1, 2, 21, 22).
- The robust housing made of high-alloy stainless steel and the precise spring technology ensure reliable switching operations and a long service life.
- Swivel angle - 90 degrees
- Flange drilling pattern - F03
- Shaft connection - T9
- Shaft connection depth – 10.2 mm
- Actuator size - 15
- Pneumatic connection - G1/8
- Functionality – single-acting
- CE mark (see declaration of conformity) – in accordance with EU explosion protection directive (ATEX)
- LABS compliance – VDMA24364-B1/B2-L
- Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0° nominal swivel angle - 0° - 0.6 l
- Closing direction – right-hand closing
- Damping – no damping
- Position detection – without
- Material information – RoHS compliant
- Safety Integrity Level (SIL) – up to SIL 2 High Demand mode up to SIL 2 Low Demand mode
- Operating medium – compressed air according to ISO 8573-1:2010 [7:4:4]
- Ambient temperature - -20 °C to 80 °C
- UKCA mark (see declaration of conformity) – in accordance with UK EX regulations
- Design structure – yoke kinematics
- Explosion protection - Zone 1 (ATEX) Zone 2 (ATEX) Zone 21 (ATEX) Zone 22 (ATEX)
- Ex ambient temperature - -20°C
- Certificate issuing body - TÜV Nord 212170801
- ATEX category Gas - II 2G
- Ex ignition protection type gas - Ex h IIC T6...T3 Gb X
- ATEX category Dust - II 2D
- Ex ignition protection type Dust - Ex h IIIC T85°C...T200°C Db X
- Shaft material – high-alloy stainless steel
- Seal material - FPM NBR PUR
- Housing material – high-alloy stainless steel
- Cover material – high-alloy stainless steel
- Material of screws – high-alloy stainless steel
- Corrosion resistance class KBK - 3 - high corrosion exposure
- Note on operating/control medium - Oiled operation possible (required for further operation)
- Nominal operating pressure - 5.6 bar
- Product weight - 1600 g
- Installation position – any
- Price per unit
