Product Description
- The rotary actuator is used for the automated operation of valves in industrial plants where there is a risk of explosion.
- The DAPS-0120-090-RS-F0507-CR rotary actuator is a single-acting pneumatic actuator with spring return.
- It has a flange pattern in accordance with ISO 5211 and a valve connection in accordance with VDI/VDE 3845 (NAMUR).
- The design is ATEX-compliant and can be used up to SIL 2.
- The technical design includes a yoke kinematic system, G 1/8 as a pneumatic connection and the T17 shaft connection.
- Spring force - 1 to 4
- Swivel angle - 90°
- Pneumatic connection - G 1/8
- Standard connection to valve – ISO 5211
- Flange drilling pattern - F05-F07
- Shaft connection - T17
- CE mark (see Declaration of Conformity) – in accordance with EU Ex Protection Directive (ATEX)
- LABS compliance – VDMA24364-B1/B2-L
- Air consumption at 0.6 MPa (6 bar, 87 psi) per cycle 0° nominal swivel angle - 4.9 l
- Valve connection complies with standard VDI/VDE 3845 (NAMUR)
- Actuator size - 0120
- Closing direction – right-hand closing
- Damping – no damping
- without position detection
- Material information – RoHS compliant
- Safety Integrity Level (SIL) – up to SIL 2 High Demand mode, up to SIL 2 Low Demand mode
- Operating medium – compressed air in accordance with ISO 8573-1:2010 [7:4:4]
- Ambient temperature - -20 to 80 °C
- UKCA mark (see Declaration of Conformity) – in accordance with UK EX regulations
- Design structure – yoke kinematics
- Explosion protection – Zone 1 (ATEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX)
- Housing material – high-alloy stainless steel
- Shaft material – high-alloy stainless steel
- Material number Housing - 1.4408
- Material number shaft - 1.4301
- Seal material – FPM, NBR, PUR
- Ex ambient temperature - -20°C
- Certificate issuing body - TÜV Nord 212170801
- Functionality – single-acting
- ATEX category Gas - II 2G
- ATEX category Dust - II 2D
- Corrosion resistance class KBK - 3 - severe corrosion exposure
- Note on operating/control medium - Gel operation possible (required for further operation)
- Nominal operating pressure - 5.6 bar
- Installation position – any
- Shaft connection depth – 19.3 mm
- Price per item
