Product Description
- The GF rotary distributor is mainly used in applications where compressed air or other media must be passed through rotating components.
- It is used in mechanical engineering, automation technology, the packaging industry and in hydraulic and pneumatic systems, especially where continuous rotary motion is required.
- The product may only be secured against twisting at the mounting points of the shaft [1] and the housing [2].
- It is important that the shaft and housing are not clamped together, as this would overload the double ball bearing.
- To avoid overload, the shaft and housing must be mounted without tension, which preserves the service life of the bearing and prevents premature wear.
- - Connection 1 - G1/8 to G1/2
- - Connection 2 - M5 to G1/4
- - Nominal diameter – 4.1, 8 or 15 mm
- - Installation position – any
- - Operating pressure complete temperature range - -0.95 to 10 bar
- - Max. speed - 3,000 rpm
- - Operating medium – compressed air according to ISO 8573-1:2010 [7:-:-]
- - Note on operating and control medium – Gel operation possible
- - Ambient temperature - -10 to 80 °C
- - Pneumatic connection 1 - G1/8
- - Pneumatic connection 2 - M5
- - Corrosion resistance class KBK - 1 (low corrosion stress)
- - Nominal tightening torque - 1.22 Nm
- - Tolerance to nominal tightening torque - ± 20%
- - Normal flow rate 1-2.1 (6->0) - 490 to 4050 l/min
- - Normal flow 1-2.X open (6->0) - 2,250 to 14,130 l/min
- - Weight - 400 to 1190 g
- - Packaging unit: 1 piece
- - Price per item
