High-temperature clamp profile hose exhaust hose CP Kapton® 476 - Inner Ø 50 to 1,016 mm - Length up to 6 m - Price per meter or per roll
From € 151,56 / m |
Price incl. VAT |
plus cut length surcharge
Delivery within 7-10 days
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
719147600551
Type
Inner Ø (inch/mm) | / 55 mm |
outer Ø | 67 mm |
overpressure | 0.495 bar |
vacuum | 0.370 bar |
bend radius | 20 mm |
length | per meter |
Product Description
- The flexible high-temperature clamping profile hose CP Kapton® 476 is ideally suited for hot and cold gases.
- The suction and pressure hose is also used to transport chemical and paint vapors and to extract paint mist.
- The clamping profile hose is ideal for use as a vapor recovery hose on the loading arm and in the extraction system as an extraction arm.
- The CP Kapton® 476 high-temperature hose is also suitable for high-temperature extraction in foundries, blast furnaces, smelters, the ceramics industry, the glass industry, steelworks and aluminum smelters.
- Another area of application for the hose is, for example, the extraction of engine exhaust fumes or use as an above-floor underfloor extraction system.
- The CP Kapton® 476 suction and discharge hose impresses with its abrasion protection thanks to the outer clamping profile and the tension-resistant clamping in the clamping profile.
- The hose is highly flexible, compressible and, in addition to its very good heat resistance, has good resistance to alkalis, acids and extremely good chemical resistance.
- Wall material - Kapton® laminated glass fabric
- Clamping profile support spiral - galvanized steel
- Inner Ø - 50-51 to 1016 mm
- Outer Ø - 62 to 1028 mm
- Bending radius - 18 to 213 mm
- Compressible - 4:1
- Temperature range - -60°C to 400°C
- REACH - compliant according to 1907/2006/EC
- RoHS - compliant according to 2015/863/ EU RoHS 3
- Length - up to 6 m
- Price per meter or per roll
Versions: (51)
Narrow down your selection
Inner Ø (inch/mm)
outer Ø
overpressure
vacuum
bend radius
length
Ratings
No evaluation has been given