Product Description
- The thermoplastic hose is suitable for high-pressure applications with mineral and hydraulic oils, greases and media based on phosphate esters.
- The hose is made of polyurethane and equipped with high-strength, brass-plated steel wires as a pressure carrier. In addition, the hose is provided with a friction-reducing intermediate layer to improve the impulse load capacity. The inner core is a seamlessly extruded polyester tube.
- The hose exceeds the requirements of SAE 100 R2 and enables precise control of the hydraulics - even under the most extreme working conditions - thanks to its high pulse resistance and low expansion.
- The abrasion-resistant hose offers high weather and age resistance.
- Material outer ceiling - polyurethane
- Inner core material - seamlessly extruded polyester tube (PEL)
- Material reinforcement - high-strength brass-plated steel wires
- Nominal size - 6 to 19
- Size - 4 to 12
- Outside Ø - 12.8 to 27.8 mm
- Inside Ø - 6.4 to 19.5 mm
- Bending radius - 40 to 170 mm
- Working pressure - 150 to 400 bar
- Burst pressure - 600 to 1600 bar
- Layers - 2
- MSHA approval - no
- Safety factor - 4: 1
- Temperature range - -40 to max. +100 ° C (+70 ° C for air- and water-based media)
- Standard - SAE 100 R2
- Roll - 15 to 50 m
