Item No.:
928014649251
Product Description
- GESIPA blind rivets are a reliable method for permanently and securely joining different materials, including delicate ones.
- GESIPA’s blind riveting technology is used in industrial applications where components need to be joined together. It enables joints to be made even when the component is only accessible from one side, and is suitable for a variety of materials. Depending on the setting tool used, the setting process can be documented.
- A blind rivet consists of two components: the hollow rivet and the rivet mandrel. Unlike some other joining techniques, fitting a blind rivet requires access to the component from just one side.
- During the setting process, the setting tool pulls the rivet mandrel back using the chuck jaws. This deforms the hollow rivet and sets it in the component. The rivet mandrel then breaks off at the designated predetermined breaking point. The remaining mandrel stays inside the hollow rivet and, depending on the design and application, can perform an additional function within the joint.
- GESIPA blind rivets are available in various designs, materials, shapes, lengths and colours. Depending on your requirements, standard designs as well as variants designed for specific applications are available.
- As a rule of thumb for determining the rivet shank length:
- Material thickness + rivet shank diameter = rivet shank length
- Further technical data on GESIPA blind rivets is available.
- The hollow rivet consists of the setting head and the hollow rivet shank. The setting head is located on the working side and is available in various diameters and shapes depending on the design, for example as a flat-round head, countersunk head or large head. The rivet shank is available in various lengths and is selected according to the thickness of the material to be riveted.
- The rivet mandrel is used to deform the rivet shank during the setting process. It has a predetermined breaking point at which it breaks off once the blind rivet has been set.
- The residual rivet mandrel refers to the part of the rivet mandrel that remains inside the hollow rivet after the setting process. The broken-off part of the rivet mandrel is separated from the set rivet by the blind rivet setting tool.
- Material – aluminium/steel
- Size – 5 x 10 mm
- Pack of 10
- Price per unit
