Product Description
- The rotary actuator is suitable for pneumatic automation tasks with a 90° swivel angle, compact design and standardised ISO 5211/NAMUR interfaces.
- The DAPS pneumatic rotary actuator from the T4 series is double-acting with a swivel angle of 90°.
- It is designed for a nominal operating pressure of 5.6 bar and an operating pressure range of 3 to 8.4 bar.
- The actuator is standardised with ISO 5211 for the valve connection and VDI/VDE 3845 (NAMUR) for the valve connection.
- It is RoHS-compliant, LABS-compliant according to VDMA24364-B1/B2-L, has yoke kinematics and is approved for use in ATEX zones 1, 2, 21 and 22.
- Functionality – double-acting
- Swivel angle - 90°
- Nominal operating pressure – 5.6 bar
- Operating pressure – 3 bar to 8.4 bar
- Operating medium – compressed air in accordance with ISO 8573-1:2010 [7:4:4]
- Note on operating/control medium - Gel operation possible (required for further operation)
- Closing direction – right-hand closing
- Design structure – yoke kinematics
- Damping – no damping
- Position detection – without
- Ambient temperature - −20 °C to +150 °C
- Ex ambient temperature - −20 °C ≤ Ta ≤ +150 °C
- Installation position – any
- Standard connection to valve – ISO 5211
- Valve connection complies with standard VDI/VDE 3845 (NAMUR)
- Housing/cover material – wrought aluminium alloy
- Shaft/screw material – high-alloy steel
- Seal material – FPM, NBR, PUR
- Corrosion resistance class KBK - 3 – high corrosion exposure
- LABS compliance – VDMA24364-B1/B2-L
- Material information – RoHS compliant
- CE mark – in accordance with EU explosion protection directive (ATEX)
- UKCA mark – in accordance with UK EX regulations
- Safety Integrity Level (SIL) – up to SIL 2 Low Demand mode
- Explosion protection – observe the information in the certificate; Zone 1 (ATEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX)
- Price per item
