High Temperature Pressure Transmitter - PR-35XHTC - Pressure Range 3 to 30 bar
| € 1.082,67 |
| Price incl. VAT |
| plus € 29,00 shipping costs |
Do you have any questions?
We would like to assist you!
We would like to assist you!
Product Description
- The high-temperature pressure transmitter compensates for linearity deviations and temperature errors and enables the output of measurement results in the form of standardised signals.
- It is suitable for use up to a media temperature of 300 °C, the electronics are designed for temperatures up to 120 °C.
- The high-temperature pressure transmitter of the 35XHTC series can be used at a media temperature of up to 300 °C; the temperature in the electronics housing must not exceed 120 °C.
- The pressure is transmitted through the flush separating diaphragm by means of oil filling via a capillary (with the simultaneous function of a cooling coil) to the silicon pressure measuring cell.
- The pressure transmitter is equipped with a digital output (RS485); a 16 bit D/A converter for analogue output signals is integrated in the processor (optionally for 4 to 20 mA or 0 to 10 V, please note version).
- The READ30 software and the KELLER K107 cable are used to read out the data, which can then be displayed on a PC, laptop or palmtop (not included).
- The READ30 software also allows the pressure signals to be recorded and graphically displayed, and up to 128 transmitters can be interconnected to form a KELLER bus system.
- The transmitter can be integrated into your own software; documentation, a DLL and various examples are available for this purpose.
- The pressure ranges covered extend from 3 to 30 bar (please note the versions).
- Specification - PR-35XHTC
- Material (in medium contact) - stainless steel 316L (DIN 1.4435) / copper
- Installation position - horizontal (heat dissipation), cooling coil at ambient temperature
- Standard pressure range - 3 to 30 bar
- Overpressure - 5 to 60 bar
- Output, digital - RS485
- Output, 2-wire analogue - 4 to 20 mA
- Output, 3-wire analogue - 0 to 10 V
- Power supply (U), RS485 - 8 to 28 Vcc
- Power supply (U), 2-wire analogue - 8 to 28 Vcc
- Power supply (U), 3-wire analogue - 13 to 28 Vcc
- Accuracy, error band (20 to 300 °C) - 0.5 %FS
- Linearity (best straight line) - 0.05 %FS
- Output device - 100 Hz
- Resolution - 0.002 %FS
- Long-term stability, typ. - 0.2 %FS
- Load resistor (Ω), 2-wire -
- Load resistance (Ω), 3 conductors - > 5000
- electrical connection - binder plug 723 (5-pin, DIN-43650 plug (4-pin), MIL C-26482 plug (6-pin)
- Insulation - > 10 MΩ / 50 V
- Storage/operating temperature of the medium - 0 to 300 °C
- Storage/operating temperature of the electronics - 0 to 120 °C
- Compressive strength - 10 million compression cycles (0 to 100 %FS at 25 °C)
- Vibration resistance, IEC 68-2-6 - 20 g (5 to 2000 Hz, max. amplitude +/- 3 mm)
- Shock resistance - 20 g (11 ms)
- Protection class - IP65
- CE conformity - EN 61000-6-1 to -6-4
- Dead volume change -
- Threaded connection (standard) - G1/2
- Weight - ~ 300 g
Versions: (6)
Narrow down your selection
Pressure range
Overpressure
Output, analog
Manager
Supply (U)
Load resistance (Ω)
| Article No. | Pressure range | Overpressure | Output, analog | Manager | Supply (U) | Load resistance (Ω) | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
351100000161 | 3 bar | 5 bar | 4 to 20 mA | 2 | 8 to 28 Vcc | < (U-7V) / 0.02 A |
|
||||
|
||||||||||||
|
|
351100000133 | 10 bar | 20 bar | 4 to 20 mA | 2 | 8 to 28 Vcc | < (U-7V) / 0.02 A |
|
||||
|
||||||||||||
|
|
351100000026 | 30 bar | 60 bar | 4 to 20 mA | 2 | 8 to 28 Vcc | < (U-7V) / 0.02 A |
|
||||
|
||||||||||||
|
|
351100000046 | 3 bar | 5 bar | 0 to 10 V | 3 | 13 to 28 Vcc | > 5000 |
|
||||
|
||||||||||||
|
|
351100000188 | 10 bar | 20 bar | 0 to 10 V | 3 | 13 to 28 Vcc | > 5000 |
|
||||
|
||||||||||||
|
|
351100000048 | 30 bar | 60 bar | 0 to 10 V | 3 | 13 to 28 Vcc | > 5000 |
|
||||
|
||||||||||||
Ratings
No evaluation has been given
