Product Description
- The CS2 pneumatic cylinder from SMC is used in pneumatic automation systems for linear stroke movements.
- It is suitable for mechanical engineering applications where robust and repeatable movements are required.
- Thanks to its pneumatic end-of-stroke cushioning, it is particularly suitable for applications requiring controlled deceleration at the end positions.
- The SMC CS2 pneumatic cylinder is a double-acting standard cylinder in a basic design with a single-ended piston rod.
- It operates using compressed air and is lubricated for the entire service life, so no additional lubrication is required.
- The pneumatic end-of-stroke cushioning is combined with a stop cushioning mechanism.
- Material of cylinder head and cylinder cover – cast aluminium
- Cylinder tube and piston material – aluminium alloy
- Piston rod material – steel
- Material of damping sleeve – stainless steel (rolled steel for piston Ø 320 mm)
- Seal material – NBR
- Operating principle – Double-acting, standard piston rod
- Medium - Compressed air
- Test pressure – 15.7 bar or 12 bar (piston Ø 320 mm)
- Max. operating pressure – 9.7 bar or 7 bar (piston Ø 320 mm)
- Minimum operating pressure - 0.5 bar
- Piston speed – 50 to 500 mm/s or 50 to 300 mm/s (piston diameter 320 mm)
- Damping - Pneumatic damping (+ end-of-stroke damping for piston Ø 320 mm)
- Ambient and media temperature – 0 to 70 °C (no freezing)
- Lubrication – Not required (lubricated for life)
- Installation - Basic version
- Permissible kinetic energy (with pneumatic damping activated) – 32.3 to 265 J
- Pneumatic connection – G 1/2" or 3/4"
- Piston rod thread – M30 x 1.5 to M64 x 2
- Width / Height – 143 to 344 mm
- Length – 335 to 635 mm
- Weight – 7.1 to 56.4 kg
- Price per unit
