Product Description
- The SMC IDG diaphragm dryer is used in the manufacturing industry for the treatment of compressed air.
- It is suitable for applications where compressed air with a low dew point is required.
- The version with a sub-micron filter regulator can be used for the compressed air supply to air bearings.
- Furthermore, the system is suitable for blowing off semiconductor components and for other applications where the compressed air must meet high purity requirements.
- The SMC IDG diaphragm dryer produces dry compressed air using diaphragm technology.
- The dryer is available with various filter and regulator combinations and can be used for applications with high compressed air quality requirements.
- Body material – brass (IDG1) or aluminium
- Nozzle material – plastic (IDG1) or stainless steel
- Medium – Compressed air
- Inlet pressure – 3 to 8.5 or 10 bar
- Inlet temperature – –5 to 50 or 55 °C (do not allow to freeze)
- Ambient temperature – –5 to 50 or 55 °C (do not allow to freeze)
- Dew point of the exhaust air at atmospheric pressure – –20 °C
- Inlet flow rate – 12.5 to 1190 l/min
- Outlet flow rate – 10 to 1000 l/min
- Regeneration air flow – 2.5 to 190 l/min
- Inlet pressure – 7 bar
- Inlet temperature – 25 °C
- Inlet saturation temperature – 25 °C
- Ambient temperature: -25 °C
- Regeneration air flow rate of the dew point indicator – 1 l/min [ANR] {at an inlet pressure of 0.7 MPa} (from IDG60 onwards)
- Connection size (nominal size B) – G 1/8" to 1/2"
- Height – 140 to 352 mm
- Width – 33 to 97 mm
- Depth – 20 to 91 mm
- Weight – 110 to 1550 g
