Product Description
- The SMC IZT40/41/42 ioniser is used to eliminate electrostatic charges in industrial production and handling processes.
- It is suitable for applications where electrostatic discharges, dust build-up or damage to sensitive components need to be prevented.
- The ioniser is used, amongst other things, in the processing of printed circuit boards and glass substrates.
- It can be used both in automated production lines and in areas with stringent ESD control requirements.
- The SMC IZT40/41/42 ioniser is a rod-type ioniser with a separate controller and a separate high-voltage power supply module for neutralising static electricity.
- It operates on the principle of corona discharge and is available in standard, AC and dual-AC versions.
- Low-maintenance electrode needles and a range of electrode cassettes allow the system to be adapted to different requirements in terms of discharge speed and energy efficiency.
- Material Controller – ABS cover, aluminium / silicone rubber switch
- Material of high-voltage power supply module – ABS, aluminium
- Material: Bar – ABS cover / PBT emitter cassette / Tungsten or monocrystalline silicon emitter / Silicone rubber and PVC high-voltage cable
- Type of ion generation – corona discharge
- Electrode voltage type – AC, DC or Dual-AC (ITZ42)
- Applied voltage – ±7000 V or ±6000 V
- Offset voltage – within ±30 V
- Medium – Compressed air (dry, clean compressed air)
- Operating pressure – max. 0.5 MPa
- Test pressure – 0.7 MPa
- Hose connection – straight plug-in connector, Ø 6 mm (plug-in on one side)
- Current consumption – max. 0.7 A (with a maximum of +0.6 A per ioniser) / max. 0.8 A (with a maximum of +0.7 A per ioniser) / max. 1.4 A (with a maximum of +1.3 A per ioniser)
- Supply voltage – 24V DC ±10 %
- Input signal NPN specification (IZT40) – connection to DC (-), voltage range max. 5V DC, current consumption max. 5 m
- Input signal PNP specification (IZT41 and 42) – connection to DC (+), voltage range 19 V DC for supply voltage, current consumption max. 5 mA
- Output signal NPN specification (IZT40) – Max. load current 100 mA, residual voltage max. 1 V (load current at 100 mA), max. applied voltage 26.4 V DC
- Output signal PNP specification (IZT41 and 42) – Max. load current 100 mA, residual voltage max. 1 V (load current at 100 mA)
- Function IZT40 – Detection of abnormally high voltages (Ion generation stops if a fault is detected)
- Functions of IZT41 and 42 – Auto-Balance, maintenance logging, detection of abnormally high voltages (ion generation stops if a fault is detected) and ion generation stop input
- Effective distance for dissipating static electricity – 50 to 2000 mm
- Ambient and medium temperature for controller, high-voltage power supply module – 0 to 40 °C
- Ambient and medium temperature for Bar – 0 to 50 °C
- Air humidity – 35 to 80 per cent relative humidity (no condensation)
- Standards/Directives – CE marking (EMC Directive)
- Number of electrode cassettes – 2 to 7
- Rod length – 160 to 460 mm
- Length of high-voltage cable – 3 m
- Height of high-voltage power supply module – 187 mm (IZT40 and 41) 197 mm (IZT 42)
- Wide high-voltage power supply module – 99 mm (IZT40 and 41) 153 mm (IZT 42)
- Shallow high-voltage power supply module – 75 mm
- Weight – 1500 to 2860 g
