Wedge anchor FAZ II PLUS GS R - stainless steel - with large washer - drill core Ø 8 to 16 mm - anchor length 75 to 283 mm - pack 4 to 50 pcs - price per pack
|
€ 180,36 (€ 9,02 / Piece)
|
| Price incl. VAT |
Delivery within 7-10 days
Do you have any questions?
We would like to assist you!
We would like to assist you!
Item No.:
928800564669
Type
| Drill core Ø | 12 mm |
| min. Borehole depth | 250 mm |
| Anchor length | 260 mm |
| Useful length | 160/180 mm |
| Thread | M12 x 186 mm |
| SW | 19 mm |
| VE | 20 piece |
Product Description
- The FAZ II Plus GS Wedge Anchor is approved for cracked and non-cracked concrete C20/25 to C50/60. It is also suitable for concrete C12/15, concrete C80/95, solid sand-lime brick and steel fiber concrete (expert opinion available in each case).
- The FAZ II Plus with large washer is versatile and can be used for the highest demands. It is ideally suited, for example, for fastening steel components with slotted holes. It is also used for anchor plates, facade substructures with slotted holes, wooden structures, tie rods and beam anchorages.
- The bolt anchor is suitable for push-in and push-through installation.
- The FAZ II Plus made of stainless steel offers maximum safety for outdoor use.
- The FAZ II Plus GS Wedge Anchor can be set even more easily and quickly by eliminating the need for borehole cleaning. The proven expansion clip, which safely introduces the loads into the concrete, enables an immediately loadable, high load-bearing capacity even in dynamic applications.
- Thanks to the pre-mounted large washer, the FAZ II Plus GS are suitable for fastening steel attachments with slotted holes, enable even better alignment and thus ensure reduced assembly effort.
- With the new ETA rating, the transverse load-bearing capacities are decisively increased, which means that fewer fastening points and anchors are required. The new ETA also confirms the use of FAZ II Plus M16 to M24 for dynamic loading. In addition, the ETA rating together with other test reports (RWS, ZTV, ETK) ensures high loads in case of fire.
- The FAZ II Plus outlasts an entire century, making it perfect for large, long-lasting construction projects (M10-M16). An external independent expert opinion confirms the service life of anchorages up to 120 years.
- Thanks to its variable anchoring depths, the FAZ II Plus enables millimeter-precise adaptation to loads.
- Material - stainless steel
- Approvals - ETA-19/0520, ETA-20/0897, DoP No. 0313
- Drill core Ø - 8 to 16 mm
- Min. drill hole depth for through-hole mounting - 65 to 270 mm
- Anchor length - 75 to 283 mm
- Max. Useful length hef,stand./hef,min. - 10/20 to 160/180 mm
- Thread - M8 x 38 mm to M16 x 189 mm
- Width across flats - 13 to 24 mm
- Seismic approval - C1 from M8, C2 from M10
- VE - 4 to 50 pieces
- Price per VE
Versions: (8)
Narrow down your selection
Drill core Ø
min. Borehole depth
Anchor length
Useful length
Thread
SW
VE
| Article No. | Drill core Ø | min. Borehole depth | Anchor length | Useful length | Thread | SW | VE | Price incl. VAT | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
928800564663 | 8 mm | 65 mm | 75 mm | 10/20 mm | M8 x 38 mm | 13 mm | 50 piece |
|
||||
|
|||||||||||||
|
|
928800564664 | 8 mm | 85 mm | 95 mm | 30/40 mm | M8 x 58 mm | 13 mm | 50 piece |
|
||||
|
|||||||||||||
|
|
928800564665 | 10 mm | 85 mm | 95 mm | 10/30 mm | M10 x 53 mm | 17 mm | 50 piece |
|
||||
|
|||||||||||||
|
|
928800564666 | 10 mm | 105 mm | 115 mm | 30/50 mm | M10 x 73 mm | 17 mm | 50 piece |
|
||||
|
|||||||||||||
|
|
928800564667 | 12 mm | 100 mm | 110 mm | 10/30 mm | M12 x 61 mm | 19 mm | 20 piece |
|
||||
|
|||||||||||||
|
|
928800564668 | 12 mm | 120 mm | 130 mm | 30/50 mm | M12 x 81 mm | 19 mm | 20 piece |
|
||||
|
|||||||||||||
|
|
928800564669 | 12 mm | 250 mm | 260 mm | 160/180 mm | M12 x 186 mm | 19 mm | 20 piece |
|
||||
|
|||||||||||||
|
|
928800564670 | 16 mm | 270 mm | 283 mm | 160/180 mm | M16 x 189 mm | 24 mm | 4 piece |
|
||||
|
|||||||||||||
Ratings
No evaluation has been given
